Bettis GVO-Series Pneumatic Linear Valve Actuator

Bettis

Bettis GVO-Series Pneumatic Linear Valve Actuator

Bettis

Field proven linear valve actuator suitable for automating most types of rising stem valves in safety shutdown and control applications.

Specifications

Power Source
Pneumatic
Product Type
Pneumatic Actuator
Actuation
Linear, Double-acting
Certifications
SIL 3 suitable, ATEX. PED 97/23/EC - Pressure Equipment Directive, IP66/IP67M
RoHS Statement
This product is only intended for use in large-scale fixed installations excluded from the scope of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2).
Control Type
On/off, ESD
Valve Type
Slab, wedge, knife, expanding gate, globe, rising stem ball valves, and dampers
Operating Temperature
Standard -23 °C to +74 °C (-10 °F to +165 °). Consult factory for low temperatures.

Features

  • Automates most types of rising stem valves- slab, wedge, knife and expanding gate, globe, rising stem ball and dampers
  • Extended stroke for each model
  • External tie bars allow contained energy release in event of over-pressure
  • Optional materials of construction for sour service
  • Options include limit switches, relays, solenoids, pressure pilots, dampeners and manual overrides
  • Travel adjustment on top and bottom makes sure the piston stops on the actuator not on the valve, protecting valve seat
  • Standard open pedestal design, closed pedestal is available on request
  • GVO LP-DA pneumatic linear actuator, double acting, cylinder size from 5 ” to 48 ” tandem, MAWP up to 150 psi
  • GVO LP-SR, pneumatic linear actuator, spring to extend, cylinder size from 10” to 48”, tandem AWP up to 150 psi (10.34 Bar), spring preload up to 53,000 lbs (235,755 Nm)
  • GVO LP-FS, pneumatic linear actuator, spring to retract, cylinder size from 10” to 48” tandem, MAWP up to 150 psi (10.34 bar), spring preload up to 53,000 lbs (235,755 Nm)

Documents & Drawings

Training & Services