Level Measurement Solutions for Fractionator Column Bottom and Trays
Continuous and point level measurement and control solutions for the refining industry
Accurate Level Measurement in Changing Process Conditions
Distillation columns allow separation of fluid mixtures based on their boiling points. As vapors rise through the column, different components will condense at different temperatures and accumulate for withdrawal. Distillation columns will have a wide range of temperatures throughout. Fluids, especially at the lower end can be dirty and cause coating and plugging of equipment. If the bottom fluid is heavy, like tar, direct measurement is recommended and DP level is an appropriate solution to measure level. Otherwise, guided wave radar technology such as the Rosemount 5300 Level Transmitter installed in a chamber, cage or bridle is the recommended solution. Continuous radar level measurement can be combined with point level switch technology to add high and low level alarm. The Rosemount 2100 Level Switch series provides reliable point level measurement and control.
Click to continue reading Accurate Level Measurement in Changing Process Conditions
Product Solutions
The Rosemount 5300 Level Transmitter is ideal for challenging measurements on liquids, slurries, and solids, offering state of the art reliability and safety features in level and interface applications. Rosemount 5300 offers several advantages such as easy installation, no need for calibration, and is unaffected by process conditions. Also, it is SIL 2 certified making it your first choice for safety applications. It has a robust construction and features powerful built-in diagnostics allowing you to focus on the essential part - your plant.
- Direct Switch Technology gives increased sensitivity, high reliability, and long measurement ranges
- Signal Quality Metrics gives you the ability to work proactively with your level instrumentation
- Probe End Projection offers greater level measurement reliability
Accuracy
± 0.12 in. (3 mm)
Repeatability
± 0.04 in. (1 mm)
Measurement Range
Up to 164 ft (50 m)
The new Rosemount™ 2140 is the world's first wired HART® vibrating fork level detector for applications including overfill prevention, high and low level alarms, and pump protection. Providing reliable level detection of all liquids as well as sediments, the Rosemount 2140 offers greater ease-of-use and flexibility with smart diagnostics that continuously monitor electronic and mechanical device health, and a fully integrated remote proof-testing capability, helping to increase safety and efficiency of both plant and workers. The Rosemount 2140:SIS is certified to IEC 61508 (SIL 2) for safety-critical applications.
- World's only wired HART vibrating fork level detector.
- Dry/wet switching optimized for many media types. Includes wet sand settings for managing tank and separator efficiency.
- Dry/wet switching reliability is maximized even when the media properties are unknown. Especially important in small tanks and pipes where levels may rapidly change.
Operating Pressure
Full vacuum to 1450 psig at 122 °F psi (100 barg at 50 °C)
Operating Temperature
-40 to 302 °F (-40 to 150 °C) as standard. -94 to 500 °F (-70 to 260 °C) as option
Certifications/Approvals
ATEX, IECEx, USA, Canadian, see full specs for complete list of certifications
The Rosemount 3051S Thermal Range Expander enables transmitters to attach to high temperature processes in order to extend the thermal operating range and improve response time. Engineered with two different fill fluids, this product eliminates the need for heat tracing. This device can be used in various process applications, and allows for direct and remote mounting, Tuned-System™ assembly and balanced systems.
- Seal system with two different fill fluids extends the operating temperature range up to 770 °F (410 °C)
- Optimized for use in various high process temperature applications and low ambient temperature conditions
- Eliminates the need for heat tracing and impulse piping which reduces installation costs
Max. Operating Pressure
Up to 3,750psi (258,6 bar)
Process Temperature Range
Based on fill fluid - Maximum 770°F (410°C), Minimum -157°F (-105°C)
Communication Protocol
4-20 mA HART®, WirelessHART®, FOUNDATION™ Fieldbus
