Level Measurement for marine bio-fuels tank
Marine Level measurement using modern radar technology increases safety and efficiency
Solutions to address customer challenges with marine level measurement
The maritime industry is currently experiencing a significant transformation, leading to increased interest in alternative fuels. The shipping industry has a significant impact on greenhouse gas emissions, accounting for approximately 2-3% of the global carbon footprint.
As a result, it has become imperative for the industry to address its environmental impact and seek sustainable solutions. By adopting the new fuels the goal is to make substantial progress in reducing its carbon emissions and mitigating its environmental footprint and moving towards sustainable and greener operations.
Biofuels such as fatty acid methyl aster (FAME), Biomass to liquid fuels (BTL), and hydrotreated vegetable oil (HVO) are a few types that can be used onboard ships. For solo use or as a drop-in.
Biofuels are slightly more challenging to measure compared to conventional fuels and radar is an excellent technology for it.
Click to continue reading Solutions to address customer challenges with marine level measurement
Product Solutions
The Rosemount™ 5408 Non-Contacting Radar Level Transmitter uses enhanced technology and Human Centered Design to deliver accurate, reliable measurements on both liquid and solid materials. Using two-wire FMCW technology the Rosemount 5408 deploys a continuous echo to maximize radar signal strength and produce a more robust and reliable measurement. Delivering ease-of-use at every touch point, the Rosemount 5408 uses an intuitive software interface to guide the operator through installation, commissioning, proof-testing and maintenance. Powerful onboard diagnostics suite proactively monitors transmitter health and alerts if there is an issue. Safety certified to IEC 61508 for SIL 2 applications, the Rosemount 5408:SIS reduces cost of risk, increases efficiency and protects people and the environment.
- Low 12V dc lift-off voltage
- Immune to intermittent power loss
- Unique PTFE seal design eliminates the need for o-rings
Accuracy
Standard: ± 0.08 in. (± 2 mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Measurement Range
492 ft (150m), 82 ft (25 m) for Rosemount 5408:SIS in Safety mode
Operating Pressure
-15 to 1450 psi (-1 to 100 bar)
The Rosemount 5300 Level Transmitter is ideal for challenging measurements on liquids, slurries, and solids, offering state of the art reliability and safety features in level and interface applications. Rosemount 5300 offers several advantages such as easy installation, no need for calibration, and is unaffected by process conditions. Also, it is SIL 2 certified making it your first choice for safety applications. It has a robust construction and features powerful built-in diagnostics allowing you to focus on the essential part - your plant.
- Direct Switch Technology gives increased sensitivity, high reliability, and long measurement ranges
- Signal Quality Metrics gives you the ability to work proactively with your level instrumentation
- Probe End Projection offers greater level measurement reliability
Accuracy
± 0.12 in. (3 mm)
Repeatability
± 0.04 in. (1 mm)
Measurement Range
Up to 164 ft (50 m)
With Rosemount TGU 68 Tank Radar Gauge you can trust to get accurate and reliable measurement that keeps you operating under the most difficult conditions in the tank and on the deck. This 26 GHz FMCW radar gauge is robust and prepared for optional redundant level or independent high level and/or overfill alarm measurements. Even in severe conditions, when you most depend on accuracy, you get the trusted performance and reliability that only 30 years of marine experience can bring.
- Accurate and reliable measurement that keeps you operating under adverse conditions in tank and on deck.
- 26 GHz FMCW tank radar, with advanced signal processing, high bandwidth and optimized parabolic antenna.
- For tankers and offshore installations with 35 m measurement range.
Operating Temperature
-40 to +100 C° (increased to +260 C° when mounted on TGS6810)
Reference Accuracy
± 2 mm
Weight
17 kg.
