Level Measurement for Warehouse, Shelter and Bunker Storage in Metal Ore Processing
Accurately measure levels of final products in protected storage to reliably track material in inventory.
Continuous Inventory Monitoring with Non-contacting Radar Technology
With large volumes of materials, dedicated warehouses and large shelters are used for storage of the final or intermediate product. The warehouse not only stores the material but protects it from rain and wind keeping it dry and contained. In these storage systems, the material is often deposited into the area with dump trucks or conveyor car systems that drop the material into open areas. Materials can be removed from the warehouse by similar means or through floor level grates and filter systems. It is important to know the total amount of material in inventory.
Materials stored in the warehouse can be very dusty and form uneven surfaces. The surface changes as the material is moved in and out of the area.
Click to continue reading Continuous Inventory Monitoring with Non-contacting Radar Technology
Product Solutions
The Rosemount™ 5408 Non-Contacting Radar Level Transmitter uses enhanced technology and Human Centered Design to deliver accurate, reliable measurements on both liquid and solid materials. Using two-wire FMCW technology the Rosemount 5408 deploys a continuous echo to maximize radar signal strength and produce a more robust and reliable measurement. Delivering ease-of-use at every touch point, the Rosemount 5408 uses an intuitive software interface to guide the operator through installation, commissioning, proof-testing and maintenance. Powerful onboard diagnostics suite proactively monitors transmitter health and alerts if there is an issue. Safety certified to IEC 61508 for SIL 2 applications, the Rosemount 5408:SIS reduces cost of risk, increases efficiency and protects people and the environment.
- Low 12V dc lift-off voltage
- Immune to intermittent power loss
- Unique PTFE seal design eliminates the need for o-rings
Accuracy
Standard: ± 0.08 in. (± 2 mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Measurement Range
492 ft (150m), 82 ft (25 m) for Rosemount 5408:SIS in Safety mode
Operating Pressure
-15 to 1450 psi (-1 to 100 bar)
Rosemount solids level switches provide flexible measurement of powders, grains, and pellets. Their compact size makes them suitable for installation in all sizes of vessels and silos. Four different technologies are available, so you can find the right solution for your process.
- Rosemount solid switches are maintenance free
- Rotatable and robust die-cast aluminium housing that allows orientation of electrical connection after mechanical installation
- Rosemount solid switches are insensitive to temperature or pressure changes
Dimensions
Extension Lengths:
2501 - ≤ (157") for extended tube, ≤ 10,000 mm (393") for rope version
2511 - ≤ (157")
2521 - ≤ (157") for extended tube, ≤ 20,000 mm (787.4") for cable version
2535 -≤ (157")
2555 - ≤ 20,000 mm (78,.7) for rod version, ≤ 20,000 mm (787.4") for rope and remote versions
2501 - ≤ (157") for extended tube, ≤ 10,000 mm (393") for rope version
2511 - ≤ (157")
2521 - ≤ (157") for extended tube, ≤ 20,000 mm (787.4") for cable version
2535 -≤ (157")
2555 - ≤ 20,000 mm (78,.7) for rod version, ≤ 20,000 mm (787.4") for rope and remote versions
Sensitivity
2501 - For media ≥ 15 g/l
2511 - For media ≥ 30 g/l
2521 - For media ≤ 5 g/l
2535 -For media ≥ 20 g/l
2555 - For media DC* ≥1.5
2511 - For media ≥ 30 g/l
2521 - For media ≤ 5 g/l
2535 -For media ≥ 20 g/l
2555 - For media DC* ≥1.5
Process Temperature
2501 - Temp. ≤ 1100°C
2511 - Temp. ≤ 150°C
2521 - Temp. ≤ 150°C
2535 - Temp. ≤ 150°C
2555 - Temp. ≤ 500°C
2511 - Temp. ≤ 150°C
2521 - Temp. ≤ 150°C
2535 - Temp. ≤ 150°C
2555 - Temp. ≤ 500°C
