Measurement Solutions for Grinding, Mixing, and Cooking Processes in Pet Food Production
Maximize production capacity during initial pet food manufacturing processes.
Ensure food safety and accurate dosing of ingredients
Whether you are manufacturing wet or dry pet food, both begin with initial grinding, mixing, and pre-cooking processes. First the raw ingredients, such as meat and meat byproducts, are grinded through a series of screws to help break down the meat chunks into the desired size for cooking. Next the product goes through some initial mixers and then is carefully measured into the correct portions to the cooker. The product is then heated to high temperatures to ensure food safety and oftentimes choline chloride is injected into the meat during pre-cooking for its metabolism and cellular growth benefits.
Advanced measurements solutions can be used throughout the grinding, mixing, and pre-cooking processes to ensure accurate dosing and measurement of costly ingredients.
Click to continue reading Ensure food safety and accurate dosing of ingredients
Product Solutions
With unmatched flow and density measurement for liquids, gases and multiphase flow, ELITE Coriolis flow meters are designed to deliver accurate, repeatable flow measurement for even your most challenging environments and applications.
- Get unparalleled measurement sensitivity and stability from this uniquely designed meter
- Gain real-time and in-process measurement integrity assurance with Smart Meter Verification
- Realize unmatched flow and density measurement performance in your most challenging liquid, gas and slurry applications
Liquid Accuracy / Repeatability
0.1% - 0.05% / 0.05% - 0.025%
Gas Accuracy / Repeatability
0.25% / 0.20%
Density Accuracy / Repeatability
0.0005 - 0.0002 g/cc / 0.00025 - 0.0001 g/cc
The Rosemount 3408 Non-Contacting Radar Level Transmitter is a versatile FMCW radar suitable for level measurement and overfill prevention in many industries, including chemical. Smart features save time and maximize efficiency for trouble-free operations, simplifying commissioning, operation and testing. Smart diagnostics help you proactively plan maintenance and optional Bluetooth® connectivity allows convenient configuration and maintenance. Manual or automatic verification at scheduled intervals can be conducted from the control room at any time without process interruptions. Perform proof-testing remotely and in-situ with onboard functionality. NAMUR type tested and third party certified to IEC61508 for use in safety critical applications.
- Lens antenna available for very small process fittings (3/4") and with optional bracket mount
- All PTFE wetted parts allow for use in harsh conditions, such as corrosive medias
- Convenient configuration and maintenance using optional Bluetooth technology
Accuracy
Standard: ± 0.08 in. (± 2 mm)
Ultra accuracy: ± 0.04 in. (± 1mm)
Ultra accuracy: ± 0.04 in. (± 1mm)
Measurement Range
98 ft. (30 m), 49 ft. (15 m) for the IEC 61508 certified version
Operating Pressure
-15 to 363 psig (-1 to 25 bar)
Ideal for hygienic process-control applications, H-Series flow meters are accurate, low frequency, fit-and-forget meters with a compact, drainable, cleanable design. Get reliable performance under extreme process conditions, including entrained gas.
- Minimize variability in process control with superior sensitivity in a compact design
- Ensure product consistency and quality with superior density measurement
- Enable fast product change-over with self-draining design and superior temperature stability
Liquid Accuracy / Repeatability
Up to ±0.05% of rate (±0.025% repeatability)
Gas Accuracy / Repeatability
Up to ±0.35% of rate ( ±0.25% repeatability)
Density Accuracy / Repeatability
Up to ±0.0005 g/cm3 ( ±0.0002 g/cm3 repeatability)
