Pump Cavitation Monitoring for Refining, Chemical, and Wastewater Processes
Avoid pump damage and costly plant shutdowns with Rosemount 3051S Process Intelligence
Early Detection of Pump Cavitation with Advanced Pressure Diagnostics
A majority of pump failures are not caused by the pump itself. Pump problems, including cavitation, mostly occur when piping becomes blocked, limiting flow and causing low pressure to the pump that can severely damage the pump impeller. Cavitation can also occur from poor piping design or conditions not meeting NPSH (Net Positive Suction Head) requirements. If there is not enough pressure at the suction end of the pump it will begin to cavitate which can impact product quality, lead to excessive pump vibration, and eventually pump failure and process shutdown.
Fortunately, pump cavitation can be detected and corrected early by using the Rosemount 3051S pressure transmitter with the Process Intelligence diagnostic. Early detection can improve process quality, extend pump life, and increase process uptime by providing early warning of pump cavitation on the discharge of the pump.
Click to continue reading Early Detection of Pump Cavitation with Advanced Pressure Diagnostics
Product Solutions
The Rosemount 3051S Coplanar™ Pressure Transmitter is designed with the patented Coplanar technology and is the no-equal solution for pressure, flow and level measurements. This scalable platform, available in both wired and WirelessHART® communication protocols, seamlessly integrates with manifolds, primary elements and seal solutions and optimizes performance for accurate differential, gage and absolute pressure measurements. With the SuperModule™ platform, this transmitter resists overpressure and line pressure effects to maintain unmatched performance.
- Patented Rosemount Coplanar technology offers optimized performance as a pressure, DP Flow and DP Level solution
- Best-in-class, scalable architecture enhances performance, functionality and process connections
- Transmitter arrives fully assembled and leak tested for simple installation and maintenance
Warranty
Up to 15-year limited warranty
Rangedown
Up to 200:1
Communication Protocol
4-20 mA HART, WirelessHART®, FOUNDATION fieldbus
Optimize performance with the Rosemount 3051S In-line Pressure Transmitter, the industry’s best-in-class solution. This scalable SuperModule™ platform is no-equal for gage and absolute pressure measurement performance, as it minimizes process variability and reduces maintenance. Engineered for direct threaded connection, manifold or seal system solutions, this in-line pressure transmitter connects to the process, making installation quick and cost-effective.
- No-equal, scalable architecture optimizes performance, functionality and process connections
- Designed with direct threaded connections or manifolds and remote seals for a quick and cost-effective installation
- Ultra and Classic Performance class enhances process control
Warranty
Up to 15-year limited warranty
Rangedown
Up to 200:1
Communication Protocol
4-20 mA HART, WirelessHART®, FOUNDATION fieldbus
Featuring multivariable measurements in a single device, the Rosemount 3051SFC Compact Orifice Flow Meter delivers accurate flow measurements. Built with either a compact orifice plate or a patented 4-hole conditioning plate, this flow meter provides measurements for closed loop control, general purpose monitoring and custody transfer applications. Available in line sizes up to 12 in. (300 mm), this primary element is designed for gas, liquid and steam service and operates well in harsh process conditions. This device is also engineered with built-in flow calculations for fully compensated mass flow measurements and is offered with multiple communication protocols including
WirelessHART®.
- Designed with built-in flow calculations for direct reporting of fully-compensated mass flow
- Compact orifice plate available in 0.5 - 12 in. (15 - 300 mm) line sizes for application flexibility
- Advanced diagnostics provide diagnostic coverage to detect abnormal process conditions and electrical loop issues
Warranty
Up to 15-year limited warranty
Rangedown
Up to 200:1 (14:1 flow turndown)
Measurement Range
Up to 1000 inH2O (2,48 bar) differential, Up to 3626 psia (250,00 bar) absolute, Up to 3626 psig (250,00 bar) gage
Make reliable pressure measurements in extreme conditions with the Rosemount 3051SAL Level Transmitter, a best-in-class solution that offers enhanced capabilities for pressurized and vented tank level measurements. This transmitter is safety certified and engineered with advanced diagnostics for increased insight. Designed to allow direct mounting, remote mounting, balanced systems and Tuned-System™ assemblies, this device can meet a variety of demands and process requirements for level applications.
- Allows for direct mounting, remote mounting and balanced and tuned-systems to meet various application requirements
- Tuned-Systems can reduce temperature effects by 10-20% and improve response time by 80% vs. traditional installations
- Offers a variety of process connections including flanged, threaded and hygienic seals for application flexibility
Max. Operating Pressure
Up to 10,000psi (689.48 bar)
Process Temperature Range
Based on fill fluid - Maximum 770°F (410°C), Minimum -157°F (-105°C)
Communication Protocol
4-20 mA HART®, WirelessHART®, FOUNDATION™ Fieldbus
