Level Measurement in Adsorbents Storage Tanks
With non-contacting radar level technology
Reliable Monitoring of Adsorbents with Radar Level Transmitters
Adsorbents can be used to remove contaminants from fluids or gases or separate molecules in different processes. There are various types of adsorbents, including activated carbon, clays, zeolites and resins. The production processed varies depending on type of adsorbents, but the end steps often consists of sieving of final product and storage before packaging.
When storing adsorbents, it is important to control the moisture in the environment especially for adsorbents like silica gel or zeolites that are used for drying applications.
Click to continue reading Reliable Monitoring of Adsorbents with Radar Level Transmitters
Product Solutions
The Rosemount 3408 Non-Contacting Radar Level Transmitter, with Smart Echo Supervision™ technology, offers enhanced reliability for level measurement and overfill prevention.
- It supports wireless and remote configuration through optional Bluetooth® for the wired model or WirelessHART® for automated measurements in hard-to-reach areas, cutting down wiring costs.
- The transmitter's smart diagnostics package provides real-time monitoring, remote testing, health checks, and historical data access, enhancing safety, efficiency, and proactive maintenance.
- Safety certifications, including SIL2 (IEC61508) and NAMUR type testing, along with remote proof-testing, ensure protection for people, assets, and the environment.
- With Smart Echo Supervision™ technology, Rosemount Non-Contacting Radars (except for wireless models) automatically track all echoes, including those from obstructions in the vessel, and distinguish them from the real product surface echo. This ensures the true product level is reliably and accurately reported.
- Lens antenna available for very small process fittings (3/4") and with optional bracket mount
- All PTFE wetted parts allow for use in harsh conditions, such as corrosive medias
Accuracy
Standard: ± 0.08 in. (± 2 mm)
Ultra accuracy: ± 0.04 in. (± 1mm)
Standard (WirelessHART®) (±3mm)
Ultra accuracy: ± 0.04 in. (± 1mm)
Standard (WirelessHART®) (±3mm)
Measurement Range
98 ft. (30 m)
Operating Pressure
-15 to 363 psig (-1 to 25 bar)
The Rosemount 2501 Solids Level Switch withstands heavy loads and extreme temperatures, and is suitable for full, demand or empty detection for all bulk media in all types of vessel. It is a simple, robust and reliable technology that is insensitive to dust, electrical charge, adhesion, extreme temperature and pressure. It is simple to install and can be mounted in a vertical, horizontal or oblique position.
- Robust paddle design able to withstand heavy loads and extreme temperatures
- Mechanically stable shaft bearing design
- Unaffected by dust, electrostatic charging and caking
Operating Pressure
145 psi (10 bar)
Operating Temperature
-40 to 2012°F (-40 to 1100 °C)
Certifications/Approvals
CE, ATEX, IECEx, FM, CSA
The Rosemount 2555 Solids Level Switch is robust and suitable for all solids bulk media in all types of vessels. It can be used for full, demand or empty detection and is designed for low dielectric medias and extreme conditions such as high temperatures, high mechanical stress and high tensile forces.
- Suitable for most bulk materials in various applications even with high temperature and pressure
- "Active Shield Technology" protects against media build up or caking to ensure complete reliability
- Measurement of medias with dielectric constant down to 1.5
Operating Pressure
363 psi (25 bar)
Operating Temperature
-40 to 932°F (-40 to 500°C)
Certifications/Approvals
CE, ATEX, IECEx, FM, FMc, EHEDG
