Measurement Instrumentation for Optimal Flocculant Management
Efficiently manage operational challenges that often hinder efficiency and process control
Using the power of advanced solutions to optimize flocculant usage
In mining operations, the use of flocculants is essential to optimize water recovery and recirculation from the west stream. The batch process for flocculation involves precise dosing and mixing of the chemical agent. Routinely, mining operations face challenges in this regard. Maintaining consistent dosing agent concentrations and dosing rates can be a challenge. Unfortunately, variations in flocculant characteristics, equipment wear, and operational complexities often result in inefficiencies and suboptimal process control. Emerson's Measurement Instrumentation provides a reliable solution to address these challenges. With its advanced sensors, accurate measurement capabilities, and intuitive control systems, Emerson's instrumentation enables operators to optimize the batch processing of flocculants in mining. By utilizing Emerson's Measurement Instrumentation, mining facilities can achieve enhanced operational efficiency, improved process control, and maximize the benefits of flocculant usage.
Click to continue reading Using the power of advanced solutions to optimize flocculant usage
Product Solutions
The Rosemount™ 5408 Non-Contacting Radar Level Transmitter uses enhanced technology and Human Centered Design to deliver accurate, reliable measurements on both liquid and solid materials. Using two-wire FMCW and Smart Echo Supervision technologies, the Rosemount 5408 deploys a continuous echo to maximize radar signal strength and produce a more robust and reliable measurement. Delivering ease-of-use at every touch point, the Rosemount 5408 uses an intuitive software interface to guide the operator through installation, commissioning, proof-testing and maintenance. Powerful onboard diagnostics suite proactively monitors transmitter health and alerts if there is an issue. Safety certified to IEC 61508 for SIL 2 applications, the Rosemount 5408:SIS reduces cost of risk, increases efficiency and protects people and the environment.
- 26 GHz FMCW with unique energy efficient chip, try our Frequency Selector to see if this is the right frequency for you.
- Low 12V dc lift-off voltage
- Immune to intermittent power loss
Accuracy
Standard: ± 0.08 in. (± 2 mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Ultra accuracy: ± 0.04in. (± 1mm)
Measurement Range
492 ft (150m), 130 ft (40 m) for Rosemount 5408:SIS in Safety mode
Operating Pressure
-15 to 1450 psi (-1 to 100 bar)
The Rosemount 2120 Level Switch provides easy to install, reliable level detection and control. 3
rdparty IEC61508 (SIL2) safety and hygienic certification with choice of outputs makes it suitable for a wide range of applications. It has no moving parts, needs no calibration and is virtually unaffected by process conditions. Adjustable switching delay prevents false switching in turbulent applications. Understand what is going on with your process- the visible heartbeat LED provides device status and health, and magnetic test point provides an easy-to-use functional test.
- Magnetic test point makes testing of the Rosemount 2120 easy
- Can be operated using the sun or battery as a power source with the 12Vdc option
- Fast drip fork design gives a quicker response time, especially with viscous liquids
Communication Protocol
Direct Load, PLC/PNP, Relay, 8/16 mA, NAMUR
Process Media Density
Minimum 37.5 lb/ft3 (600 kg/m3)
Viscosity
0.2 to 10000 cP (centiPoise)
With the Rosemount 2088 Gage and Absolute Pressure Transmitter, you can keep on schedule with a quick and easy-to-install solution. This transmitter features a Local Operator Interface (LOI) that has easy-to-use menus and built-in configuration buttons, so you can commission the device on the spot without complicated tools. This pressure transmitter is also available with manifolds and remote seals.
- Local Operator Interface (LOI) features straightforward menus and built-in configuration buttons for ease-of-use
- Factory-assembled and leak-checked integral manifold and remote seal solutions deliver a quick start-up
- Available protocols include 4-20 mA HART and 1-5 Vdc HART Low Power for application flexibility
Warranty
Up to 5-year limited warranty
Rangedown
Up to 50:1
Communication Protocol
4-20 mA HART®, 1-5 V Low Power HART®
Delivering highly reliable and robust measurement, F-Series flow meters are the preferred choice for process control applications. Choose these smart meters to more efficiently run your process and resolve your toughest productivity challenges
- Achieve highly accurate mass volume flow and density measurement in applications that require a compact, drainable design
- Choose from 316L Stainless Steel and C-22 nickel alloy in all sizes
- Improve measurement and tracking with extensive process and meter diagnostics with on-board historian and data logging
Liquid Accuracy / Repeatability
Up to ±0.1% of rate (0.05% of rate)
Gas Accuracy / Repeatability
Up to ±0.35% of rate (0.25% of rate)
Density Accuracy / Repeatability
Up to ±0.0005 g/cm3 (0.0002 g/cm3)
The Rosemount 1208 Series provides accurate and reliable level measurement and open channel flow calculations. The radar level transmitter has been designed to solve challenges in water and wastewater, utilities and basic chemical applications. The Rosemount 1208 uses continuous non-contacting radar technology and features Smart Echo Supervision™ technology, in a compact PVDF housing with drinking water and food grade approvals. Its encapsulated design also withstands outdoor conditions and is fully submersible over extended periods of time. The Rosemount 1208 Series communicates via Bluetooth® wireless technology, 4-20 mA HART® or IO-link and has a broad range of mounting accessories, making it easily integrate into both new and existing systems.
- With Smart Echo Supervision™ technology, Rosemount Non-Contacting Radars automatically track all echoes, including those from obstructions in the vessel, and distinguish them from the real product surface echo. This ensures the true product level is reliably and accurately reported.
- Compact and robust design to withstand harsh environments, designed for outdoor conditions, submersion and hazardous location installations
- Simple configuration over your tablet/mobile device via Bluetooth® wireless technology
Communication Protocol
Bluetooth® wireless technology, 2-wire 4-20 mA HART or 3-wire 4-20 mA, IO-Link, Switch
Interoperability
Process connections and accessories sold separately. See Product Data Sheet for complete list of brackets, flanges, IO-Link accessories, etc.
Measurement Range
49.2 ft. (15m)
