Pressure Measurement Product Tutorials

In this tutorial you will learn the steps for configuring a device tag which may be displayed electronically to identify your Rosemount 3051.

Time to complete: Approximately 5 minutes

What You’ll Need: 

• Rosemount 3051 Pressure Transmitter
• 475 Field Communicator

Tutorial Summary:

1. Starting from the Home Screen, Press 2 to select "Configure".
2. Press 2 to select "Manual Setup".
3. Press 7 to select "Device Information".
4. Press 1 to select "Identification".
5. Press 1 to select "Tag".
6. Enter desired Device Tag. Press ENTER, SEND.
   (For HART revision 7 only)
7. Press 2 to select "Long Tag".
8. Enter the desired Long Tag. Press ENTER, SEND, HOME.

In this tutorial you will learn the steps for setting pressure units to customize your Rosemount 3051 for your specific application.

Time to complete: Approximately 5 minutes

What You’ll Need: 

• Rosemount 3051 Pressure Transmitter
• 475 Field Communicator

Tutorial Summary:

1. Starting from the Home Screen, Press 2 to select "Configure".
2. Press 2 to select "Manual Setup".
3. Press 1 to select "Process Variable".
4. Press 1 to select "Pressure Setup".
5. Press 4 to select "Pressure Units".
6. Select the desired pressure units. Press ENTER, SEND, OK, HOME.

In this tutorial you will learn the steps for setting range points to customize your Rosemount 3051 for your specific application.

Time to complete: Approximately 5 minutes

What You’ll Need: 

• Rosemount 3051 Pressure Transmitter
• 475 Field Communicator

Tutorial Summary:

1. Starting from the Home Screen, Press 2 to select "Configure".
2. Press 2 to select "Manual Setup".
3. Press 2 to select "Analog Output".
4. Press 1 to select "Set Range Points".
5. Press 2 to select "Upper Range Value".
6. Enter the Upper Range Value. Press ENTER, SEND, OK.
7. Press 3 to select "Lower Range Value".
8. Enter the Lower Range Value. Press ENTER, SEND, OK, HOME.

In this tutorial you will learn the steps for establishing multi-drop communication, allowing for the connection of several Rosemount 3051 pressure transmitters to the same communications transmission line.

Time to complete: Approximately 5 minutes

What You’ll Need: 

• Rosemount 3051 Pressure Transmitter
• 475 Field Communicator

Tutorial Summary:

1. Starting from the Home Screen, Press 2 to select "Configure".
2. Press 2 to select "Manual Setup".
3. Press 5 to select "HART".
4. Press 2 to select "Communication Settings".
5. (For HART Revision 7) Press 2 to select “Change Polling Address”.
   (For HART Revision 5) Press 1 to select “Polling Address”.
6. PressOK.
7. Enter desired polling address. (1-15 for HART Revision 5. 1-63 for HART Revision 7.)
8. Press ENTER, OK, SEND (HART Revision 5 only), HOME

In this tutorial you will learn the steps for configuring scaled variables to customize your Rosemount 3051 for your specific application.

Time to complete: Approximately 5 minutes

What You’ll Need: 

• Rosemount 3051 Pressure Transmitter
• 475 Field Communicator

Tutorial Summary:

1. Starting from the Home Screen, Press 2 to select "Configure".
2. Press 2 to select "Manual Setup".
3. Press 3 to select "Scaled Variable".
4. Press 5 to select "Scaled Variable".
5. Press OK.
6. Enter custom unit (scaled variable). Press ENTER.
7. For a DP Level application, select “Linear”. Press ENTER.
8. Enter lower known pressure point. Press ENTER.
9. Enter custom unit equivalent for lower known pressure point. Press ENTER.
10. Enter upper known pressure point. Press ENTER.
11. Enter custom unit equivalent for upper known pressure point. Press ENTER.
12. Enter linear offset. Press ENTER, OK, HOME.