Système instrumenté de sécurité DeltaV
Adoptez l’approche SIS pour accroître l’intégrité de vos mesures de sécurité tout en améliorant la disponibilité du procédé.
Le système DeltaV SIS™ adopte une démarche moderne pour augmenter la sécurité tout en améliorant la disponibilité des procédés industriels. Les systèmes éprouvés DeltaV SIS surveillent continuellement la sécurité de votre exploitation, l'état des appareils et l'intégrité de l'ensemble de la boucle de sécurité, ce qui réduit considérablement les risques. Le solveur logique, certifié pour le niveau de sécurité (SIL) 3, s'appuie sur la technologie du marshalling électronique pour diminuer les coûts liés à l'installation, à la mise en service et à la maintenance, tout en réduisant considérablement l'encombrement.
Emerson’s BMS solution includes a number of pre-built sequences, and a design methodology that helps customers get to grips with specifying sequence logic in an efficient and intuitive way. Our Consultants can advise on BMS design per the codes, norms and standards applicable in your region.
DeltaV SIS BMS application enables the burner unit(s) to go safely through all relevant states, from start-up, to operation, and shutdown when needed. Dependent on the size of the burner unit, DeltaV SIS can also provide automated leak testing of gas valves.
The DeltaV SIS™ Emergency Shutdown (ESD) solution is designed to prevent hazardous situations from occurring and initiates the shutdown of a plant, unit, or piece of equipment should if required.
Sensors detect the onset of hazardous conditions, and the DeltaV SIS logic solver is configured to take your plant to a safe state, by manipulating the required final elements (valves and pumps).
High Integrity Pressure Protection Systems (HIPPS) are a special type of safety function typically used where process design pressure ratings change, such as where a high-pressure rated pipeline enters a lower-pressure rated processing unit or measuring station. In normal operation, dangerously high pressures should not occur. But if they do, the HIPPS must react quickly to shut off the upstream source of high pressure and prevent it from reaching the low pressure side of the process plant.
DeltaV SIS can be used as the Logic Solver in a complete HIPPS solution for SIL 3 application. The pre-engineered solutions with standard field enclosure designs suit this application well. Emerson’s safety team has standard HIPPS application solutions ready to deliver.
DeltaV SIS monitors the whole safety loop including control of level devices and shutdown valves to automatically shut off the feed to the tanks if the level reaches the high cut off limit. The SIS Logical Solver communicates with the intelligent devices via HART protocol to diagnose faults before they case spurious trips.
Tank Overfill Protection systems often require relatively small I/O quantities distributed over a large geographical area. Our pre-engineered DeltaV SIS Field Enclosures are ideal for this application.