Level Measurement of Solvents for Clean-in-Place (CIP) Dairy Tanks
Accurately measure fluid levels to reliably monitor storage, filling and discharge of water and chemicals.
Prevent Overfills and Dry Pumps in CIP Tanks
In order to run the CIP processes, it is also necessary to prepare the solvents that will be used, which include cleaning agents such as caustic, acid, sanitizer and sterilizer. These tanks will store cleaning agents and water, so the level measurement is required to monitor filling and discharge, as well as to avoid overfills and pump drying.
Click to continue reading Prevent Overfills and Dry Pumps in CIP Tanks
Product Solutions
The Rosemount 1408H Level Transmitter provides accurate continuous level measurement. The radar is specifically designed to match hygienic requirements in the food & beverage industry. It is equipped with hygienic certifications (3-A®, FDA, EC 1935/2004, EHEDG, etc.), a compact and polished stainless steel housing, and the ability to withstand CIP and SIP cleaning processes which allows you to minimize contamination risk and assure product safety.
- Compact form factor enables installation in applications with space constraints, such as small tanks and vessels
- G1" process connection is compatible with full suite of hygienic process connection adapters
- M12 electrical connector allows for simple installation and start-up
Communication Protocol
4-20 mA (3-wire), switch (PnP/NpN), and IO-link (enabling e.g. Ethernet/IP, Profinet, Modbus TCP/IP, OPC UA)
Interoperability
Connection accessories sold separately. See Product Data Sheet for complete list of cables, IO-Link accessories, etc.
Process Connection
Tri Clamp, DIN 11851, Varivent®, etc. See Product Data Sheet for complete list of options.
The Rosemount 2120 Level Switch provides easy to install, reliable level detection and control. 3
rdparty IEC61508 (SIL2) safety and hygienic certification with choice of outputs makes it suitable for a wide range of applications. It has no moving parts, needs no calibration and is virtually unaffected by process conditions. Adjustable switching delay prevents false switching in turbulent applications. Understand what is going on with your process- the visible heartbeat LED provides device status and health, and magnetic test point provides an easy-to-use functional test.
- Magnetic test point makes testing of the Rosemount 2120 easy
- Can be operated using the sun or battery as a power source with the 12Vdc option
- Fast drip fork design gives a quicker response time, especially with viscous liquids
Communication Protocol
Direct Load, PLC/PNP, Relay, 8/16 mA, NAMUR
Process Media Density
Minimum 37.5 lb/ft3 (600 kg/m3)
Viscosity
0.2 to 10000 cP (centiPoise)
